The Beginners Guide To Services (From Step 1)

Restoring The Original Colour Of A Car

Car repainting means applying a new paint that matches the original colour of the car in order to maintain its original state. One could be pushed by some reasons so as to restore the original paint. The car could be disfigured or scraped off the paint if it got into an accident. secondly, the vehicle could be aged and thus the paint becomes dull.

There are many shops and mechanics that deal with car paint restoration. This means that the owner doesn’t have to go through all the tiresome process that he doesn’t have an expertise in.

The original colour and look of the car can be achieved through repainting. For auto paint restoration, one has to match the original colour of the car to the new paint. The process of car paint restoration is simple. Below are procedures to follow when repainting a car.

Getting Ready To Repaint A car
It includes getting rid of any unwanted substances like dirt out of the part of the vehicle needing repainting. It means removing dirt and any other substances out of the surface that requires painting. Cleaning helps get rid of dirt, grease or road grime. One has to choose whether the painting is done on the outer surface only or together with the inner surface. Masking tape is applied to areas that do not need repainting in order to protect them in a case the owner is after the outer look only. Atleast three types of paints are needed,primer coat,finish coat and clear coat. One also needs to have protective gears such as respirator. A respirator saves one from breathing in paint fumes.

Removing The Old Paint
It the process that involves rubbing off the original paint of the car. It necessitates one to scrape off the old painting. One has to sand the car by hand back to bare metal with a perfect smooth finish. This process consumes a lot of time. If one needs to save time ,then only rubbing to get a soft and even surface is done. One then completes the process by wiping the whole surface in order to clean the dust.

Areas not been worked one have to be well protected. This helps to avoid overspraying. One need to learn how to spray in order not to make mistakes and end up wasting materials and not achieving the desired result.
Priming involves mixing primers with thinners in the recommended ratio of the paints. The mixed paint is spread evenly on the surfaces . The coating is applied two or three times.

Evenly Spreading The colour
This include painting using the top coat one time than repeating the process using a clear coat. The painting is left to cure for the given time.

It is less expensive compared to buying a new vehicle. It is a less tiresome procedure.

Interesting Research on Options – What You Didn’t Know

Getting Down To Basics with Automobiles